Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor

Precautions for use

• Kindly remove the protective film before usage.
• To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
• Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
• Prevent contamination from alkalis, alkali metal salts, and halogens.
• Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
• Avoid contact with water, condensation, and freezing.
• Minimize excessive vibration, impact, and dropping.
• Please refrain from employing this module in systems that involve personal safety concerns.
• For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.

• Compact size, measuring only 13*13*2.5mm
• Low power consumption
• High sensitivity and rapid response recovery
• Advanced MEMS technology

• Petrochemical carbon monoxide detection
• Metallurgy carbon monoxide detection
• Mining carbon monoxide detection
• Environmental protection

• Gas detected: CO
• Detection range: 5-5000ppm
• Operating voltage: 3.3-5V
• Operating current: ＜20 mA
• Output signal: Analog voltage
• Sensitivity: R0(in air)/Rs(in 150ppm CO) ≥ 3
• Operating temperature: -10-50℃
• Operating humidity: 15-90%RH (non-condensing)
• Lifespan: ≥5 years (in air)
• Dimension：13×13 x 2.5mm/0.0.51×0.51×0.1″

Documents

Shipping List